Intelligent Automotive Power Processor 120A Auto Voltage Regulator 110v/220v

Description

Korea,Thailand can choose carrier  as " AliExpress Standard Shipping " , it is cheap and  fast delivery way
MST-90+ battery voltage regulator & charger (14v 120A) for bmw ecu programer
Description
Automotive Programming Dedicated Power  Output Characteristics
DC voltage: 14.2V
Rated current: 120A
Rated power: 1700W
Ripple and noise: 100mVp-p
Automotive Programming Dedicated Power  Input Characteristics
Rated input voltage: 220V (+/-20%)
Frequency range: 40-60HZ
Power factor: 0.95
Efficiency: 85%
Automotive Programming Dedicated Power  Protection Features
Overload: 90-110% of rated output power
Over-voltage: 15V
Operating temperature: -40 - +70 C
Safety: UL60950, TUV EN60950-1
Withstand Voltage: I/P-O/P:3KVAC I/P-FG:1.5KVAC
Insulation resistance: I/P-O/P, I/P-FG:100M Ohms, 500VDC/25 /70%RH
EMC: EN55022, EN61000
Accessories details
1, charger host          1   set
2, red clip line           1   piece
3, black clip line         1   piece
4, power input line       1   piece
Note : please don’t start the engine during the process of power charging to the vehicle to avoid damage to the device caused by adverse charging
This charger is only suitable for 12V lead-acid battery charging
110V MST-90+ Car Battery Voltage Regulator Power Supply for car ECU Programming Volt
Protection Features
1. P-FG: 1.5KVAC
2. Over-voltage: 15V
3. Working temperature: -40 - +85
4. Safety: UL60950, TUV EN60950-1
5. EMC: Complies with EN55022, EN61000
6. Withstand voltage: I / P-O / P: 3KVAC I /
7. Overload: 90-110% of rated output power
8. Insulation resistance: I / PO / P, I / P-FG: 100M Ohms, 500VDC/25 C / 70% RH
Product Function
1. Smart Car Program
2. High temperature alarm.
3. Charging dedicated power
4. Short circuit and reverse polarity protection
5. Intelligent charger for motor vehicles starter battery
6. Extensive protection functions and self-protection functions
7. Input voltage 110V-240V , Output Voltage 14V/120A. (The input voltage of 11V needs to be customized)
Applicable models:
for-Volvo, for-Porsche, for-Volkswagen, for-Audi, for-BMW, for-Mercedes-Benz, for-General-Motors Etc.
Characteristics
Input
-Efficiency: 85%
-Power Factor: 0.95
-Frequency range: 40-60HZ
-Rated input voltage: 220V (+/-20%)
Output:
-DC voltage: 14.5V
-Rated current: 0-120A
-Rated maximum power: 1500W
-Ripple and noise: 100mVp-p
Operating Instructions
1. Connect power input line and battery charging wires, open power(LED1 will light) Display window will display normal charging voltage and current. And light LED2
2. Don’t charge over-discharger battery show voltage down 8V, will show (Battery bad)
3. When battery charge full, charger will cut-off in-put and show(charge end)
4. When charging current over 100A or charger out-put voltahe over 15V, this charger will cut-off out-put and light LED3, show(large charging) or (high voltahe)
5. When charger’s temperature over 60 degrees celsius, LED4(Yellow light) will light and open cooling fan at the same time.
6. When charger input have problem of over-current, over-voltage, high temperature, breaker will automatic pop-ip, user need press in breaker and cheak whether circuit have problem.
Notice
1. Please use piwer socket over 10A
2. After connect charging wire, please screw tight tum right and screw tight.
Please confirm the connection is NO problem before turn on power.
3. Don’t operate charger when the power ON