VR Probe Variable Input Voltage Probe Sensor Signal Simulator

Description

The VR probe is designed to allow technicians to input voltage from 0.5 volts up to 7 volts in 0.5 increments with only 1.5 amp output.
This will allow technicians to be able to create the desired sensor signal with the correct voltage to components on the computer side without any worry of causing damage to the ECU.
When using the VR probe in conjunction with a scope or scan tool you will be able to see if the correct voltage is being applied to that circuit/sensor and also if the component is being activated on the scope.
You may also by-pass the component and send the desired voltage directly back to the ECU which will allow you to by-pass the sensor implying that the sensor is working and allowing you to remove the fault code.
Designed to work on
Acc pedal voltages 5V
EGR signal voltage
Diesel regulator value 1V
Throttle Body
Camshaft sensor
Crankshaft sensor
MAF
MAP
LIN lines for wipers
Parking sensor
Temperature sensor
Oil pressure sensor
Transducer based sensors
Most sensors 5V and below
The VR probe will eliminate the guess work when testing for faults and unnecessarily replacing components.
Can be connected to 12V or 24V systems, the LED display indicated the vehicles voltage. The tool will also indicate low battery voltage.